Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12V

Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12V Product Description

Standard Mount Trim Tab Kit12-Gauge Blades / 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco’s ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge – 304 SS with a 5/8″ flared trailing edge and 1/8″ diameter hinge pin. Kits include standard actuators with 5/16″ SS bolts.

Lenco 15000101 Attributes

• Tab Size: 9 Inch Length x 9 Inch Width
• Material: Stainless Steel

Lenco 15000101 Features & Benefits

• 12 Gauge – 304 Stainless Steel Blades
• Fast response electric actuators
• Fully submersible actuators
• Plug and Play waterproof connectors
• Switch Kit sold seperately
• Limited 3 Year Warranty

Lenco 15000101 Installation Instructions

• Trim_Tab_Manual_TCHDAT.pdf

Lenco 15000101 Technical Bulletins

• size_diagram_standard_mount_TCHDAT.pdf
• standard_mount_diagram_TCHDAT.pdf

9″ x 9″ Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge – 304 SS with a 5/8″ flared trailing edge and 1/8″ diameter hinge pin. Kits include standard actuators with 5/16″ SS bolts.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6′ leads and Deutsch plugs
• 2 each of #30133-103 20′ actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 14′ to 18′
• Length of Tab: 9″
• Width of Tab: 9″
• Hinge Height: 2″
• Minimum Transom Height: 14″
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The trim tab is the most important difference in the way your boat rides and shows. Lenco’s trimming sheet can make your boat ride smooth, dry, faster, and has…

Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12VRelated Products

Lenco Upper Mounting Bracket w/Gland Seal (2008-Present)
Lenco Compact Upper Mounting Bracket – 2 Screws 1 Wire
Lenco Standard Upper Mounting Bracket – 3 Screws 1 Wire
Lenco Standard Lower Mounting Bracket – 3 Bolt
Tecnoseal R1 Rudder Anode – Zinc – 1-7/8″ Diameter
Tecnoseal R2 Rudder Anode – Zinc – 2-13/16″ Diameter
Tecnoseal R3 Rudder Anode – Zinc – 3-3/4″ Diameter
Tecnoseal R1AL Rudder Anode – Aluminum – 1-7/8″ Diameter
Tecnoseal R2AL Rudder Anode – Aluminum – 2-13/16″ Diameter
Tecnoseal R3AL Rudder Anode – Aluminum – 3-3/4″ Diameter

Frequently Asked Questions (FAQ) About Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12V

Who is the Lenco Marine ?
How to describe Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12V?
What is the material of Lenco 9″ x 9″ Standard Trim Tab Kit without Switch Kit 12V?
What is the weight of the product?
What is the size?
What is the finishing of the product?

Who is the Lenco Marine ?

Trim tabs make the single most important difference in the way your boat will ride and perform.Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety whether on a high-performance, family cruiser or small skiff.Lenco’s ballscrew design is more reliable, twice as powerful and features an instant response which makes them very user friendly.