-80%

Gedore 20 IMU-3 Hex IN-IS-PH-PZ Socket Set 1/4″, 32 Pieces

Original price was: $360.36.Current price is: $72.07.

Add to Wishlist
Compare
GR6174150_A

This item has been discontinued – limited quantities remaining
Gedore 20 IMU-3 Socket set 1/4″ 32 pcs hex IN-IS-PH-PZ
2093 U-3 1/4″ square drive reversible ratchet
1/4″ square drive hex socket: 4mm
1/4″ square drive hex socket: 5mm
1/4″ square drive hex socket: 6mm
1/4″ square drive hex socket: 7mm
1/4″ square drive hex socket: 8mm
1/4″ square drive hex socket: 9mm
1/4″ square drive hex socket: 10mm
1/4″ square drive hex socket: 11mm
1/4″ square drive hex socket: 12mm
1/4″ square drive hex socket: 13mm
1/4″ square drive hex socket: 14mm
Slotted bit socket: 4mm
Slotted bit socket: 5.5mm
Slotted bit socket: 6.5mm
Slotted bit socket: 8mm
Hex bit socket: 3mm
Hex bit socket: 4mm
Hex bit socket: 5mm
Hex bit socket: 6mm
Hex bit socket: 8mm
Phillips bit socket: #1
Phillips bit socket: #2
Phillips bit socket: #3
Pozidriv bit socket: #1
Pozidriv bit socket: #2
Pozidriv bit socket: #3
1/4″ square drive sliding T-bar: 115mm (4.5″)
1/4″ square drive extension: 55mm (2″)
1/4″ square drive extension: 148mm (6″)
1/4″ square drive universal joint
1/4″ square drive driving handle
With forged, tempered hexagon sockets, hand-operated
With accessories made from GEDORE vanadium steel 31CrV3
With fine toothed, dial change ratchet
In plastic case
Dimensions: 275 x 150 x 42 mmNOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.Gedore Warranty (Abridged)

  • GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials.GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration).Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries.This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  • GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products.The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer’s sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have.To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below.GEDORE is not responsible for Products which are lost or damaged during return.It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment.GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  • The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, ‘Abuse’).By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.

    • Indieset: : Tool Sets
    Features: : Ratcheting
    Tipstyle: : Slotted
    Tipstyle: : Hex
    Tipstyle: : Phillips
    Tipstyle: : PoziDriv
    Tipsize: : Phillips #1
    Tipsize: : Phillips #2
    Tipsize: : Phillips #3
    Tipsize: : Slotted 4.0 mm (5/32 in.)
    Tipsize: : Slotted 5.5 mm
    Tipsize: : Slotted 6.5 mm
    Tipsize: : Slotted 8.0 mm
    Tipsize: : Pozidriv #1
    Tipsize: : Pozidriv #2
    Tipsize: : Pozidriv #3
    Tipsize: : Hex Metric 3.0 mm
    Tipsize: : Hex Metric 4.0 mm
    Tipsize: : Hex Metric 5.0 mm
    Tipsize: : Hex Metric 6.0 mm
    Tipsize: : Hex Metric 8.0 mm
    Metricsize: : 4.0 mm
    Metricsize: : 5.0 mm
    Metricsize: : 6.0 mm
    Metricsize: : 7.0 mm
    Metricsize: : 8.0 mm
    Metricsize: : 9.0 mm
    Metricsize: : 10 mm
    Metricsize: : 11 mm
    Metricsize: : 12 mm
    Metricsize: : 13 mm
    Metricsize: : 14 mm
    Ratchetdrivesize: : 1/4 Inch Square Drive
    Country of Origin: : Made in Germany
    Stockstatus: : In Stock
    UPC/EAN: : 4010886617410

    Reviews

    There are no reviews yet.

    Be the first to review “Gedore 20 IMU-3 Hex IN-IS-PH-PZ Socket Set 1/4″, 32 Pieces”

    Your email address will not be published. Required fields are marked *

    Related products

    Richelieu 797596OBRZ Modern Metal Pull 7975

    Rated 0 out of 5
    Original price was: $17.55.Current price is: $7.02.
    Richelieu 797596OBRZ Modern Metal Pull 7975
    Innovative Lighting Portable Stern Light w/18″ Pole Clamp [560-2113-7]

    Innovative Lighting Portable Stern Light w/18″ Pole Clamp [560-2113-7]

    Rated 0 out of 5
    Original price was: $42.00.Current price is: $16.80.
    Product added!
    The product is already in the wishlist!
    Removed from Wishlist

    Shopping cart

    close